You must have javascript enabled to use gearh.com !

Best Selling Gear

Vr Lens Mod For Htc Vive Cosmos

USD $47.88

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Consumer Electronics / Virtual Reality / Other Virtual Reality Accs

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

COMPLETE ORIGINAL VRI/DCU TM GEAR VR LENS + ADAPTER REPLACEMENT MOD DESIGNED FOR HTC VIVE COSMOS TM / COSMOS ELITE TM Wide I.D. Radius Design @ 55° - Zero FOV Obstruction "IF THE LENS WILL NOT SEAT 100% FLAT, EYE FATIGUE, PUPIL SWIM, NAUSEA ETC. CAN OCCUR. THESE LENS ADAPTERS ARE MADE USING THE ULTRABASE TM HOT GLASS BED - YOUR ADAPTERS WILL HAVE A DISTINCTIVE, TEXTURED, 100% FLAT SEATING SURFACE- THE BASE TEXTURE ALSO SHOWS THAT THE ADAPTER WAS MADE USING A CHEMICAL-FREE ADHESION METHOD Adapters are available in a variety of colors in both gloss or matte textures Filaments used: Matterhackers, Hatchbox, Paramount, Amolen and AIO Robotics FEEDBACK FROM BUYER/PRICE WHEN Worked great, thank you. GEAR VR LENS MOD FOR HTC VIVE COSMOS - INCLUDES NON-MARRING INSTALL PRY TOOL (# ) ( ) US $129.88 Past month Reciprocal feedback - View feedback left by coffee_school for the member who left feedback for coffee_school A+ seller!! GEAR VR LENS MOD FOR HTC VIVE COSMOS - INCLUDES NON-MARRING INSTALL PRY TOOL (#221351254889) ( )
US $129.88 Past 6 months Reciprocal feedback - View feedback left by coffee_school for the member who left feedback for coffee_school Awesome Product! The Difference Compared To The Stock Lenses Is Amazing GEAR VR LENS MOD FOR HTC VIVE COSMOS - SUPERIOR TO OEM FRESNEL LENS (#221351254889) ( )
US $129.88 Past 6 months Reciprocal feedback - View feedback left by coffee_school for the member who left feedback for coffee_school IMPORTANT! WATCH THE VIDEO BEFORE ATTEMPTING INSTALLATION. JUST GO TO YOUTUBE AND TYPE: VIVE LENS MOD What you get: 2 x Ultrabase Gear VR Lens Adapters 2 x Samsung/Fujifilm-Designed Gear VR Lenses (L/R) What you need: Small Flat Head Screwdriver (a (plastic spudger or butterknife works best and is recommended) Part details: This kit comes with everything you need to upgrade your HTC Vive lenses to the improved optics of the GearVR lenses. The lenses have already been carefully fitted into the adapters, all you have to do is use a flathead screwdriver or butterknife at the flat part of the adapter to pop the HTC Vive lenses out and click the new ones in. This upgrade not only increases clarity and sharpness - THE ENTIRE LENS BECOMES THE SWEETSPOT -  move your eyes around the headset without the image ever becoming blurry. Godrays are 100% removed. ZERO LOSS IN FOV - It's like having a brand new VR headset but with the most enjoyable experience available. As some Gear VR lenses can differ in amount of distortion and optics, each individual lens has been tested extensively to make sure they provide a clear, crisp, seamless experience. The adapters have been printed using the best FDM printer in the world. The Ultra Glass hot bed produces a consistent, perfectly flat surface every time, (notice the bottom of the adapters in the pics)  this guarantees a solid level fit, which is critical for optics. BELIEVE THE HYPE! UPGRADING YOUR LENSES WILL BLOW YOUR MIND "ZERO GODRAYS, GHOSTING, SMEARING, OR EDGE BLUR - PERFECT IMAGE CLARITY AT ANY ANGLE - THIS MOD IS AN ABSOLUTE MUST" ATTENTION: BEFORE CONTACTING ME WITH ANY DISCREPANCY, PLEASE READ THE FOLLOWING CAREFULLY: These are important tips not mentioned in the video. Please take note of the following: 1. Always use a BLACK "ultra" microfiber cloth for cleaning the lenses - because the black cloth will **reveal even the smallest abrasive particle, granule, etc. **you will avoid scratching the lenses  - use nothing else and always shake it out before and after every use. 2. Before inserting the new lenses, carefully inspect the inner left and right inner chamber for any particles, debris etc. on the surface of the display screens. If you notice any FOD (specks, dots, etc) on the screens, use non-freon based canned air, or an air compressor within a coalescing filter inline (to catch moisture from the tank). , etc. If you still notice specks of dust and/or fine particles while looking through the lenses, remove the lenses again and repeat the process mentioned above until all dust, particles, etc. are no longer visible (I had to do this 3 times on my first mod 5 times on my 2nd mod because of the dust in the air - This issue is extremely common and will occur most every time) Hint for success: run a steamy shower and swap your lenses right outside the door - The steam will remove 99% of the dust in the air . 3. Make sure to NOT remove the black gum adhesive trim on the edge of the lens sockets after removing the original lenses. Sometimes it may get pealed off a bit - that's ok as long as the majority of it is still intact.  This is what holds the lenses on! 4. Invest in a bottle of high quality lens cleaning mist spray (Koala is a great brand) for routine cleaning. Treat your lenses with proper care and they will love you back ! SINCE 2018 100% BUYER SATISFACTION ////////////////////// PLEASE BE AWARE THAT ANY AND ALL CUSTOM FEES ACCRUED IS THE SOLE RESPONSIBILITY OF THE BUYER -  CUSTOMS FEES ARE NON-REFUNDABLE   \\\\\\\\\\\\\\\\\\\\\ CHECK MY OTHER LISTINGS FOR MORE GREAT DEALS! http://www.Pricetronicstores.com/Maladjusted-Graphics Adapter Dimensions: Tolerance: < 0.006" Redesign by G&S Composite Inc. Disclaimer/Nomenclature: "The lens mod kit is considered a custom made optics replacement with a precision dimensional tolerance meeting the common manufacturing acceptance variable of +/- 0.010"  - After measuring many Vive HMD units, It has been discovered that the end user consumer-level headset dimensional variance is rarely exact. Commonly, variance has been found to have as much as (+/- 0.35") in dimensional non-compliance. there may or may not be dimensional non-compliance with your unit, or rather a non-precision fitment - in all truth,a good fit is considered slightly snug which this kit is designed to be". "Seller is not responsible for end user installation lens scratches, marks, or any other damages to the lens kit or damage to the host HMD which can occur if the adapters are installed incorrectly.  Additional information was added to the listing to assure proper installation. With consideration to the aforementioned manufacturing process and provided installation steps of the host unit (HTC Vive) lens kit, this custom designed item is sold as a non-warrantied item. The buyer will be considered in agreement to this policy with a full understanding of it's wording, meaning and logic". Safety Warnings Use of the Gear VR lens mod for the HTC Vive are at the sole risk of the user. The seller is not responsible for injury or conditions incurred with use of this product once installed. 2018-2020 Maladjusted Graphics®

Returns Not Accepted

BEST SELLING GEAR VR LENS MOD FOR HTC VIVE COSMOS
See more
Price type
IN STOCK OUT STOCK